Slippery Rock Gazette Classified Ads, Online Edition
The information contained in our Classified Advertising, or Want Ads section is provided by third parties and not an endorsement of particular products, companies or employers. The SRG® encourages all interviewing employers to carefully conduct prescreening of all prospective employees, and purchasers of used equipment are encouraged to use caution and common sense.
Park Industries Wizard
This is a 1997 Park Wizard that has been well maintained, running and in good condition. I am asking $12,500. We also have a few other small items that you may be interested in. Please call for details
Contact: Ray Shelton
Last Updated: 12/16/2014
1998 Z Bavelloni CNC/ Egar 102S
Shop is upgrading equipment and needs to make room for new. Machine is in good shape and works fine. Has new external computer and comes with a lot of tooling, some new and never used. Machine is worth more,but we will sacrifice at $18000. Also included is two 2500lb jib cranes with approx 20 foot jib. (Will not seperate) Pictures available upon request.
Contact: Denise Hill
Last Updated: 12/15/2014
2007 Matrix Bridge Saw - tilting table - powered up and ready - $ 11,000. Martix Daytona Edge Machine - works well - $ 14,000. Flying Flat Backsplash Machine - low hours - $ 14,000. Boge S-15 Rotary Screw Air Compressor - includes piping - $ 6,000. Scorpion Sink Cut out Machine - $ 4,000. Many other machines and tools - call for info - 813-624-4545
Contact: Stone Specialties
Last Updated: 12/01/2014
Line polisher, and bridge saw
quasar tech line polisher, low hours, works great, 35,000 or best offer. can train at our shop and load and ship, for under 2,000 in the US. FOMA bridge saw cuts on 45 on block wall, rotating table $17,000 or best offer, also have welded boom,($1000) A frame trailer($2000) and Achilli sc500 slab cart.($3,500) and Curtis dual motor 5hp compressor ($1,500), sectar dual speed router and bitz($1500). also 100 slabs of quartz (450 per slab), man maid marble(350 each) and pre maid vanitie in granite ($100 each). or package deal, all equipment for 55,000 or equipment and stone 75,000. call Mark 559-905-6430
Last Updated: 11/24/2014
Equipment Package/Granite Shop
Selling granite shop equipment: Pro Edge Polisher III. 2002 Park Industries. American Bridge Saw 3600, Year 2000 Worm Drive Compressor Inline Air Dryer All equipment has been properly maintained and is in good working condition.
Contact: Keith Guier
Last Updated: 11/24/2014
Midwest Based Turnkey Dimensional Stone Quarry for Sale - Long Lived Stone Reserve
A Midwest based turnkey stone quarry and dimensional stone producer is being marketed for sale. The Company owns and operates two adjoining stone quarries covering approximately 45 acres, where it extracts high quality stone from its open pit quarries and then processes it for sale with its extensive fixed asset infrastructure. The Company has been in continuous operation for well over 50 years and it is one of the only dedicated and permitted dimensional stone companies in the state in which it operates.
Company produces and sells a full lineup of landscape stone and building stone products to customers throughout the Midwest.
Excellent turnkey opportunity for a strategic acquirer or an individual buyer!
If interested please call or email Ted Mills to learn more about the opportunity.
Contact: Ted Mills
Last Updated: 12/05/2014
8000 SF BUILDING, MATRIX BRIDGE SAW,WIZARD FACE POLISHER AND BOWL HOLE CUTTER, STINGER ROUTER AND HAND AIR POLISHERS. PROPERTY IS WORTH THE SELLING PRICE OF $475,000
Contact: JAMES A SMITH
Phone: 706 473 1050
Last Updated: 11/12/2014
Installation & Service Manager - Global Equipment Group
Looking for qualified person for installation and service manager position. Company is U.S. Representation for Denver, Noat & Comandulli. Applicants must be knowledgeable in stone machinery installation and service. CAD/CAM software and diagnosing and problem solving is preferred but will train. Package to include base salary, bonus schedule and benefits. Interested parties please email resume to email@example.com (EMAIL ONLY PLEASE).
Contact: Jeffrey Dunholter
Last Updated: 12/12/2014
Computer Technician / Training Needed
Laser Products Industries is looking to add a technical support and training person to our team. This individual must have experience in the counter top / cabinet industries, preferably a templator or CAD technician but not necessary. Must have above average computer skills with a strong knowledge of Windows OS and be good at problem solving. Light travel will be necessary and applicant should be located in the Chicago-land area. Health benefits, company matched 401K, expenses and incentives included.
Contact: Dan Louis
Last Updated: 12/03/2014
BRIDGE SAW OPERATOR / STONE FABRICATOR FOR CUSTOM STONE WORK
Granite Countertops by Quality Tile is seeking an accurate and dynamic Bridge Saw Operator that isn't just looking for a job but a career with a growing company. We are looking for a hardworking Bridge Saw Operator/Stone Fabricator who wants to make an impact on the company and those around them.
The successful candidate will be able to use hand and power cutting tools to create countertops, fireplace surrounds & hearths or anything else required. Candidates must be proficient in cutting, polishing, laminating and creating custom edge details. At least 3 years of experience is required. We are a custom fabricator Details count!
Candidates must be willing and able to work over-time when required. We are a very busy shop and have a never-ending supply of work. Our Company is made up of committed individuals who care about each other and this is a great place to work if you are willing to work hard, be consistent and you care about the quality of your work.
Please put salary expectations and recent work history in your cover letter. Please be prepared to start work on a trial basis to assess your skills. Please be ready to start work immediately.
Bridge Saw Operator / Stone Cutting Specific Skill Requirements: This position requires experience with a bridge saw cutting slabs of granite, marble, quartzite, engineered stone, etc. to the dimensions and geometry specified on shop drawings or templates
Ability to perform bridge saw configuration changes and set-ups for stone fabrication
Ability to work with rulers, tape measures, shop drawings and perform necessary mathematical calculations
Stone Finishing Specific Requirements: Familiarity with finishing work, edging, polishing
Ability to operate machines to grind and polish surfaces of stone slabs or other stone products to specific shape or design and to produce the specified finish
Additional Skill Requirements: Ability to record manufacturing information such as quantity, size and type of goods produced,
Ability to check products for quality control
Ability to work with others
Work Conditions and Physical Capabilities: Ability to perform repetitive tasks with a high level of attention to detail
Excellent eye-hand coordination
Ability to tolerate combinations of sitting, standing, walking, lifting
Ability to lift more than 50 pounds
Industrial setting; Noisy, Dusty, Wet
Last Updated: 11/24/2014
MIA Seeks Additional Staff for Technical Department
The MIA is seeking a person for the post of “technical advisor” (full-time) to join the MIA’s technical department (headed by Chuck Muehlbauer). Key components of the job and skills needed include:
POSITION SUMMARY: Responsible for supporting the association’s technical and education programs. Responsibilities include fielding technical inquires and participating in the preparation of graphics and text for technical publications. Serving on and/or staffing technical committees, as well as speaking at educational events will be required.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field telephone, email, and website generated inquires from members, non-members, architects, interior designers, engineers, etc regarding stone origin, properties, quarrying, fabrication, handling, installation, maintenance, and restoration. Participate in writing of new or revised MIA publications, including MIA Dimension Stone Design Manual, MIA Technical Bulletins, Newsletter, and industry periodical publications. Prepare and/or modify graphics of stone construction details in above publications. Assist with MIA Accreditation site inspections. Prepare and present educational sessions on stone related topics at StonExpo, Coverings, AIA, CONSTRUCT, MIA Education, and other events. Represent MIA Interests on various National Technical Committees. EDUCATION: Minimum Associate’s Degree in Construction related field of study (Architecture, Engineering, Construction Technology, etc.); Bachelor’s Degree preferred.
EXPERIENCE: 5 years’ Stone Industry Experience. Experience specific to the Decorating or Restoration sectors of the stone industry are a plus.
SKILLS: Must have good written and verbal communication skills, with public speaking experience. Must be familiar with and have a minimum level of fluency in Microsoft Office software and AutoCAD software. Candidate must be capable of providing a competent and professional representation of the MIA.
LOCATION: Oberlin, Ohio (preferred). The MIA is open to the employee working remotely if relocation is not an option.
DEADLINE TO APPLY: December 15, 2014
Interested parties should submit the following to Recruitment@marble-institute.com or by mail to: MIA, Attn: Technical Advisor Recruitment, 380 East Lorain Street, Oberlin OH 44074:
Resume; Drawing samples; Writing samples; List of public speaking history; and, Salary history.
Contact: Helen Distelhorst
Last Updated: 11/14/2014
Well established custom countertop manufacturing company with 25 years of history specializing in granite, marble, quartz, wood and solid surface is seeking a highly motivated sales manager / sales professional to develop a progressive and energetic sales team. Company is expanding upon its current and solid client base to accommodate the strategic growth plans. These plans involve the recruitment of a high energy individual to manage sales and to lead, motivate and mentor other sales team professionals. Candidates should have a university degree in marketing or business studies or a minimum of seven years of related experience or the equivelent combination of formal education and experinence. Applicant will be required to show a proven ability to motivate and lead a sales team and have experience in developing marketing and sales strategies. Job will require sales management, CRM implementation, and strong analytical and reporting skills. Extremly competitive compensation and benefits package including paid health insurance, 401K with match, and generous PTO. Relocation expenses will be considered.
Contact: Jon Lancto
Last Updated: 11/13/2014
****ROCKCRETE USA****FLOOR DRAINS, PITS, JIB CRANE FOOTINGS AND MACHINE FOUNDATIONS ****CONTRACTOR****
ROCKCRETE USA has served the Granite Industry since 2005 over the US and Canada. OUR SERVICES We specialize in the construction of Machine Foundations, Concrete Footings, Industrial Base Pads, Trench Drains and Pits. OUR PRODUCTS We have a variety of trench drain products, steel grating, and other construction products. We also offer PROJECT MANAGEMENT with the skill and knowledge, to initiate, plan, execute, monitor and control projects of all sizes. ROCKCRETE is equipped to handle all stages of a foundation project. All structures are engineer-designed or client-specific. We pride ourselves in effectively providing high quality products at wholesale prices. We have an entire in-house staff of tradesmen and equipment to take on any challenge!
Contact: Hank Liebenberg
Phone: 404-543-0446 / 877 999 1175
Last Updated: 12/15/2014