Jessica Sherwood

Omni Cubed

Omni Cubed is known for developing new and innovative ways to improve the tools used in our industry. In fact, they have just announced their third product launch in 2017, which makes 12 new (or revamped) products in just over six months! Their latest products are the Edge Seamer, Sink Hole Saver™ Slider, and No-Spin Edger. 

The Edge Seamer is an all-new seam leveling device that helps take the twist out of sink rails and cutouts, to dial-in flawless seams along material edges. Integrated rail pads allow enough flexibility for fine adjustments on each side of your seam. This new product makes surface leveling faster, easier, and more precise than shims alone.

The Sink Hole Saver™ Slider is an adjustable-length, surface-mounted reinforcement device that offers exceptional versatility and convenience. It has the same great features and non-marking vacuum cups as the Sink Hole Saver™ Manual, with the added advantage of a quickly customizable length. The product includes two 4-foot stiffening rails combined with a pre-mounted Extension Bracket Kit, and four non-marking vacuum cups that can be repositioned around cutouts, or spaced out to completely support fragile material. The Slider fully extends up to 90 inches to protect large countertops, and collapses down to 51 inches for smaller pieces, and convenient storage.

A New “Spin” on a Great Product

The patented No-Spin Edger is the solution for eliminating vertical surface damage during polishing and refinishing. This highly durable, rigid aluminum backer replaces traditional backer pads, and features a free-floating top disk with a built-in bumper that stops spinning while the polishing pad continues to work beneath it. This innovative system acts as a protective roller-guide against perpendicular surfaces, and eliminates damage caused by the edge of spinning pads. The No-Spin Edger allows fast, precise and consistent cut patterns along edges and in corners while greatly reducing production time and fatigue.

The new Edge Seamer from Omni Cubed allows fabricators to make fine leveling adjustments on each side of a seam.
Above: The new Edge Seamer from Omni Cubed allows fabricators to make fine leveling adjustments on each side of a seam.
The Sink Hole Saver™ Slider allows you to quickly customize the length of the support rail.
Above: The Sink Hole Saver™ Slider allows you to quickly customize the length of the support rail.
The redesigned No-Spin Edger features a free-floating top disk with a built-in bumper that eliminates damage that can be caused by the edge of spinning pads.
Above: The redesigned No-Spin Edger features a free-floating top disk with a built-in bumper that eliminates damage that can be caused by the edge of spinning pads.

Omni Cubed has been pioneering high-quality stone tools since 2003, to help you get the job done easier, faster, and safer.

For more information about these, and all of the other exciting new products by Omni Cubed, visit www.omnicubed.com today.